A hub motor is built into the wheel and drives it directly, while a mid-drive motor mounts at the bottom bracket and sends its power through your bike’s chain and gears, exactly like your legs do. Both are genuine, well-engineered ways to add electric assist to a bicycle, and neither is universally “better” — but for daily commuting, cargo runs and shopping trips around Sydney, a hub motor is almost always the simpler, quieter and lower-maintenance choice, which is exactly why Cyberbikes builds the Centauro around one. Mid-drives earn their keep in a narrower set of conditions: technical off-road climbing and fat bikes ploughing through sand or snow, where gearing the motor down really counts. This guide breaks down how each system actually works, using the engineering explanations published by Grin Technologies (ebikes.ca) — the Canadian company that has built and sold both hub and mid-drive kits since 2003 — plus what “250W” actually means under NSW law, whichever motor you ride.
How does a hub motor actually work?
A hub motor is a brushless DC motor built straight into the wheel itself. Instead of mounting an external motor and running a chain or belt to the wheel, the whole motor is the hub: the axle stays fixed to the frame while the outer shell, laced to the rim like any other wheel, spins. According to Grin Technologies’ engineering notes, there are two basic families of hub motor, and the difference matters for how a bike rides, sounds and lasts.
Direct-drive vs geared hub motors
A direct-drive hub motor has no internal moving parts other than the wheel itself — the magnets sit on the inside of the spinning shell, and the stator windings stay fixed to the axle. Because the wheel only turns at a low speed (roughly 200rpm at cruising speed), the motor has to be physically larger to produce useful power, since an electric motor’s power density rises with the speed difference between its magnets and windings. The upside is that a direct-drive motor is always mechanically engaged, which is what makes regenerative braking possible.
A geared hub motor uses internal planetary gearing to step a small, fast-spinning motor (often 3,000+ rpm) down to wheel speed. That gearing lets the motor be roughly half the weight of an equivalent direct-drive unit while often producing more torque for its size. Geared hubs freewheel when the motor isn’t powered, so there’s no drag when coasting — but that same freewheel means they generally can’t do regenerative braking. We’ve covered this comparison in full detail in our guide to geared vs direct-drive hub motors.
How does a mid-drive motor work, and where does it actually win?
A mid-drive motor sits at the bottom bracket, where your pedal cranks are, and drives the chainring directly — effectively acting as a second, much stronger pair of legs. Its power flows through exactly the same chain, cassette and derailleur that your pedalling does. The advantage of this layout is that the motor can use the bike’s gears: shift down on a climb and the motor keeps spinning in its efficient RPM band while needing less torque to produce the same push, which is the core reason mid-drives are prized for hill climbing.
Grin Technologies is upfront that this advantage only really shows up in specific conditions. Their engineers point to two clear cases where a mid-drive outperforms a hub motor: technical off-road and mountain biking, where keeping the motor’s weight low and central barely affects handling even on full-suspension bikes, and fat bikes in sand or deep snow, where low-speed, high-resistance riding rewards a motor that can be geared right down. The common thread in both cases is slow, high-resistance riding — not the flat bike paths and 25 km/h bike lanes most Sydneysiders actually commute on.
Why do most Sydney commuters do better on a hub motor?
For everyday riding — commuting to the Inner West, running errands, hauling cargo — a hub motor tends to win on several fronts at once:
- No dependency on your chain. A hub motor drives the wheel directly, so a snapped chain, jammed derailleur or failed freewheel doesn’t strand you. On a mid-drive, anything that takes the drivetrain out of action stops the bike completely, because both your legs and the motor share that same chain.
- Less drivetrain wear. A mid-drive pushes its power through your chain, cogs and derailleur on top of your own pedalling, which wears them out noticeably faster than pedalling alone — we’ve gone deeper on this in why mid-drive e-bikes wear chains so fast. A hub motor bypasses the drivetrain entirely, so your chain and cassette last close to as long as they would on a normal bike.
- Regenerative braking. A direct-drive hub motor can recover a small amount of energy while you slow down. A mid-drive has essentially no path to regen, since it would need to drive backwards through your drivetrain’s freewheel to do it.
- More torque-sensor options. Because a hub motor’s propulsion is completely separate from your pedalling, almost any pedal-input sensor — chain-tension, dropout, bottom-bracket — can cleanly measure how hard you’re working. On a mid-drive, the motor and your legs act through the same drivetrain, so the sensor has a harder job telling them apart.
- No constant shifting. A mid-drive rewards riders who shift up and down as they speed up and slow down, easing off the motor briefly during each shift to protect the drivetrain. A hub motor delivers uninterrupted power through every gear change, so you can leave it in a comfortable gear and let the motor do the work.
What does “250W” actually mean on either motor?
Here’s a fact that surprises a lot of riders: there’s no single, standardised way to measure a “rated watt” on an electric motor. As Grin Technologies’ power-ratings explainer puts it, power is simply torque multiplied by rotational speed. A motor producing 20 newton-metres of torque at 100rpm outputs roughly 209 watts — but the exact same motor, still producing 20 N·m of torque, spinning at 300rpm instead, outputs around 628 watts. Same torque, three times the power, just from spinning faster. That’s why a motor’s wattage isn’t a fixed ceiling on effort; it shifts constantly with load and speed while you ride.
What the “250W” on a legal Australian e-bike actually refers to is a continuous, rated output under the European pedelec standard EN 15194, which Australia has adopted. A compliant motor — hub or mid-drive — can briefly draw well above 250W climbing a hill or pulling away from lights; what matters for road legality in NSW is the sustained rating, plus the hard cut-offs: pedal-assist must taper out at 25 km/h, and any throttle-only power is capped at 6 km/h. Both motor types can be built to meet this standard equally well — it’s a controller and certification question, not a hub-vs-mid-drive one.
Watch: setting up a Bafang mid-drive controller
The controller is what actually turns a mid-drive’s raw torque into a rideable, legal amount of assist — it reads the sensor and throttle inputs, then decides exactly how much current to release to the motor windings, moment by moment. On popular Bafang mid-drive systems (BBS01, BBS02, BBSHD), that behaviour is fully programmable: assist curves, current limits and speed limits can all be adjusted through the controller’s settings. Here’s our own walkthrough of doing exactly that:
Which motor does the Cyberbikes Centauro use?
The Centauro runs a 250W rear hub motor paired with a 48V 25Ah (1,200Wh) Samsung lithium-ion battery — a deliberate choice for a bike built around Sydney commuting, cargo carrying and everyday reliability rather than technical trail climbing. The battery is UL 2271-certified, the full electrical system meets UL 2849, the 6061 aluminium frame is built to ISO 4210, and the whole drive system is designed to EN 15194’s 250W-continuous, 25 km/h pedal-assist and 6 km/h throttle limits. With a 150kg total load rating and a rear rack rated to 50kg, it’s built to keep doing exactly the kind of no-drama, chain-friendly riding that a hub motor is best at. For the full breakdown of every part working together — motor, battery, controller and sensors — see our complete guide to how e-bikes actually work.
Frequently Asked Questions
What’s the difference between a hub motor and a mid-drive motor?
A hub motor is built into the wheel and drives it directly, independent of your chain and gears. A mid-drive motor mounts at the bottom bracket and sends its power through the chain and cassette, using the bike’s own gearing the same way your legs do.
Is a mid-drive or hub motor better for commuting in Sydney?
For everyday commuting, cargo carrying and shopping runs, a hub motor is usually the better choice — it’s simpler, quieter, needs less maintenance and doesn’t wear out your chain. Mid-drives earn their advantage on steep, technical off-road climbs and in sand or snow, which isn’t the typical Sydney commute.
Does a hub motor or a mid-drive get regenerative braking?
Only a direct-drive hub motor can meaningfully do regenerative braking, recovering a small amount of energy while slowing down. Geared hub motors freewheel with no drag but no regen, and mid-drive motors have essentially no path to regen since they would need to drive backward through the drivetrain’s freewheel.
Curious which motor suits how you actually ride? Ask about our rent-to-own plans — from $99/week — or come see the Centauro and its 250W hub motor in person at Cyberbikes, 281 Parramatta Road, Leichhardt.
#CyberbikesSydney #EBikeSydney #Leichhardt #BafangMotor #EBikeTech #ElectricBikeAustralia


